| General |
Part number |
1918.010 |
| Article name |
NFX8M-D2-N32-010 |
| Function |
IT/OT edge gateway for IIoT, Industry 4.0, Integrated Industry and automation projects with optional netFIELD Cloud connectivity |
| Processor |
CPU |
1.8 GHz quad-core ARM Cortex-A53 64Bit (NXP i.MX8M Mini) |
| Memory |
RAM |
2 GB LPDDR4 |
| Storage |
32 GB eMMC flash, appr. 50 TBW (Terabytes Written) |
| Software |
Operating system |
netFIELD OS, based on Security Enhanced YOCTO Linux |
| Standard Docker |
Docker for manual and local deployment and maintenance of containers |
| IoT Edge Docker |
Docker for remote and automatic deployment and maintenance of containers from the netFIELD Cloud |
| Local Device Manager |
Web-based GUI for local device parameterization |
| Security |
Secure boot |
“High Assurance Boot” of signed software only |
| Access |
HTTPS, TLS |
| Power supply |
Supply voltage |
Unregulated +8 V DC ... +36 V DC IN (typical: +24 V DC)
Note: Voltages above 36 V may cause damage to the device.
Voltages below 8 V may cause a shutdown of the device. |
| Current consumption without USB (typical) |
110 mA at 24 V DC
220 mA at 12 V DC |
| Current consumption with USB (typical) |
350 mA at 24 V DC with two USB ports (at 5 V and 500 mA per port, resulting in additional 120 mA per port)
Note: Maximum load over all three USB ports is 1 A |
| Connector |
5.5 x 2.5 mm coaxial input jack with “bajonet” lock |
| Real-time clock |
Buffering |
On-board battery with 3V and 120mAh: SBR1632 Lithium Fluorocarbons coin cell, RoHS compliant, 10 years service interval |
| Ethernet LAN interfaces |
Type |
ETH1: 1 Gbit/s Ethernet port (eth0 in netFIELD OS)
ETH2: 100 Mbit/s Ethernet port (eth1 in netFIELD OS) |
| Connector |
2 x RJ45 jacks |
| Additional interfaces |
USB |
3 x USB 2.0 ports, type-A connector
Note: Maximum allowed output current over all USB ports is 1 A |
| Console |
Serial UART-to-USB interface, Mini USB connector |
| Serial port |
RS-232 or RS-485 (2-wire/half-duplex), terminal block connector |
| LED indicators |
Edge LED |
User-programmable yellow/green duo LED (labelled “LED” on the device) |
| Ethernet LAN |
LINK (green): Ethernet Link status
ACT (yellow): Ethernet Activity status |
| Power-on |
Orange LED indicating on/off state of the device |
| Mechanics and housing |
Dimensions of device
(without plugs and mounting bracket) |
112 mm x 84 mm x 25 mm |
| Dimensions of device with plugs and mounting bracket |
Ca. 167 mm x 118 mm x 27 mm |
| Weight of device with mounting bracket |
Ca. 350 g |
| Housing material |
Aluminum |
| Degree of protection |
IP20 |
| Mounting type |
DIN top hat rail mounting or wall mounting (with two M4 screws) |
| Admissible ambient conditions |
Ambient temperature |
Operation: –20 °C … +60 °C
Storage: –40 °C … +85 °C |
| Relative humidity |
Operation: 10 % … 90 %
Storage: 5 % … 95 % |
| Compliance |
Electromagnetic compatibility (EMC) |
EN 55032/5, EN 61000-6-2, EN 61000-6-3 |
| Safety |
EN/UL/IEC 62368-1 |
| Approvals |
UL |
In preparation |
| Conformity declarations |
CE |
Yes |
| UKCA |
Yes |
| FCC |
Yes |
| RoHS |
Yes |